Cần bán keo dán loctite 518-300ml, loctite 518-300ml

triet1998

Thành viên mới
26/7/19
36
0
6
VND
LOCTITE 518

Medium-strength, general purpose gasketing product - excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges.

LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. Fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and engine housings. NEW: Henkel has recently improved the product formulation of LOCTITE 518 providing:

  • Higher strength on contaminated surfaces
  • Better flexibility and improved adhesion
  • Enhanced sealing capability
  • Improved gap cure
  • High performance on passive metals without an activator


Your Benefits

  • Semi-flexible, medium-strength anaerobic flange gasket
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured
  • No compression set or misaligned gaskets
  • Easy to automate
  • Reduces process costs – eliminates manual assembly of conventional gaskets
  • NSF P1 Reg. No. 123758


MSDS DocumentsPDFEnglish
Technical InformationPDFEnglish
Product Catalog Car RepairPDFEnglish
Industrial Product SelectorPDF
Features and Benefits


Medium-strength, general purpose gasketing product - excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges.

LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. Fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings. NEW: Henkel has recently improved the product formulation of LOCTITE® 518 providing:

  • Higher strength on contaminated surfaces
  • Better flexibility and improved adhesion
  • Enhanced sealing capability
  • Improved gap cure
  • High performance on passive metals without an activator


  • Semi-flexible, medium-strength anaerobic flange gasket
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured
  • No compression set or misaligned gaskets
  • Easy to automate
  • Reduces process costs – eliminates manual assembly of conventional gaskets
  • NSF P1 Reg. No. 123758
Gọi: 039.831.9580
 

Attachments

  • 518.jpg
    518.jpg
    6.9 KB · Lượt xem: 0